Since money is tight these days, the solution to giving your car a new look is to indulge in a car paint job. If the mechanics are in good condition but the body is not too hot, painting may be the ideal solution.
It's a great money saver, but more so if you do it yourself rather than do it professionally. You can do this by learning the basics and following the directions for automatic spray paint. However, if you choose to undertake this project, it is important that you are ready to see it to the end.
First of all, you will need some supplies. They consist of:
You need to make sure that you wash your car thoroughly to remove dirt and grime. Otherwise, these things will be matched with your color, which makes the final result look really scary. Then use a wax / grease remover so that the paint you paint on the car is sprayed properly.
Remove rough stains by sanding. Then rinse off the loose sand. Here you'll want to use putty to fill in the small hole marks caused by the rock, for example.
Don't rush to spray your car. The car needs to be completely dry, so it's best to let it sit for a few hours. You can cover any areas you don't want to paint.
Now you can start with the primer. After the primer dries, you need to sand it lightly. Regardless of whether you use spray or spray paint, the premise remains the same. Apply only a thin layer. It may take a few.
Finally to the last step and this is applying a transparent layer. This is done in the same way as with colored layers.